Load data for 9 mm Browning Court (.380 ACP) + .355 | 95gr | Speer TMJ

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 95gr \| Speer TMJ
Manufacturer SKU:	4001
Bullet Weight:	95gr \| 6.2g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	<<locked>>
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B6199_C1213
Last updated:	2026-01-31

Load data for 74 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 95gr | Speer TMJ bullet and 37 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	70%	17506	89%	**35	96%
ADI APS 450	<<locked>>	65%	16752	86%	**4	100%
ADI AS 30	<<locked>>	73%	17535	90%	**56	100%
ADI AS 50N	<<locked>>	72%	17564	90%	**86	99%
[Accurate No. 2]*	<<locked>>	75%	17564	90%	**73	84%
Accurate Solo 1000	<<locked>>	70%	16810	86%	**43	99%
Accurate Solo 1250	<<locked>>	82%	16781	86%	**93	95%
Alliant BE-86	<<locked>>	82%	17303	88%	**19	98%
Alliant BULLSEYE	<<locked>>	71%	17376	89%	**22	90%
[Alliant Herco]*	<<locked>>	95%	15345	78%	**89	87%
[Alliant Sport Pistol]*	<<locked>>	66%	17376	89%	**19	88%
[Alliant UNIQUE]*	<<locked>>	85%	17448	89%	**48	89%
Baschieri & Pellagri 100	<<locked>>	77%	17521	89%	**73	99%
Baschieri & Pellagri 102 Pistol	<<locked>>	97%	15490	79%	**79	99%
Baschieri & Pellagri 103 Pistol 👍	<<locked>>	76%	17260	88%	**15	99%
Hodgdon Universal	<<locked>>	78%	17506	89%	**35	96%
Hodgdon CFE Pistol	<<locked>>	79%	17216	88%	**15	95%
Lovex S020	<<locked>>	77%	17114	87%	**19	91%
Maxam CSB 1	<<locked>>	86%	17274	88%	**02	95%
Maxam CSB 2 👍	<<locked>>	90%	17434	89%	**81	100%
Maxam CSB 3	<<locked>>	80%	17593	90%	**02	99%
Maxam CSB 4	<<locked>>	74%	17027	87%	**79	100%
Maxam CSB 5	<<locked>>	70%	17434	89%	**60	100%
[Ramshot Silhouette]*	<<locked>>	70%	17622	90%	**29	86%
ReloadSwiss RS 12 👍	<<locked>>	77%	17564	90%	**75	100%
ReloadSwiss RS 20	<<locked>>	88%	16853	86%	**42	90%
Rottweil P 801	<<locked>>	70%	17521	89%	**35	100%
[SNPE Vectan A0]*	<<locked>>	84%	17376	89%	**83	88%
SNPE Vectan BA 9	<<locked>>	75%	17419	89%	**79	93%
SNPE Vectan BA9 1/2	<<locked>>	77%	16940	87%	**96	95%
[Somchem MP200]*	<<locked>>	77%	17535	90%	**25	87%
Somchem MS200	<<locked>>	79%	17100	87%	**96	90%
Vihtavuori N320 👍	<<locked>>	76%	17143	88%	**12	100%
Vihtavuori N32C Tin Star	<<locked>>	96%	13953	71%	**07	100%
Vihtavuori N330	<<locked>>	83%	17608	90%	**65	97%
[Vihtavuori N340]*	<<locked>>	83%	17129	87%	**09	89%
Winchester 231	<<locked>>	65%	17579	90%	**02	97%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	62%	13634	70%	**30	93%
ADI APS 450	<<locked>>	61%	15113	77%	**1	100%
ADI AS 30	<<locked>>	62%	12952	66%	**5	100%
ADI AS 50N	<<locked>>	62%	13358	68%	**4	97%
[Accurate No. 2]*	<<locked>>	68%	14025	72%	**8	80%
Accurate Solo 1000	<<locked>>	61%	13198	67%	**8	98%
[Accurate Solo 1250]*	<<locked>>	60%	9166	47%	**6	84%
[Alliant BE-86]*	<<locked>>	61%	9079	46%	**3	88%
[Alliant BULLSEYE]*	<<locked>>	60%	12821	65%	**8	84%
[Alliant Herco]*	<<locked>>	81%	11023	56%	**1	80%
[Alliant Sport Pistol]*	<<locked>>	62%	15418	79%	**63	86%
[Alliant UNIQUE]*	<<locked>>	68%	11037	56%	**1	80%
Baschieri & Pellagri 100	<<locked>>	60%	10791	55%	**2	93%
Baschieri & Pellagri 102 Pistol	<<locked>>	70%	7876	40%	**0	91%
Baschieri & Pellagri 103 Pistol	<<locked>>	62%	11066	57%	**1	95%
Hodgdon Universal	<<locked>>	62%	11443	58%	**8	90%
[Hodgdon CFE Pistol]*	<<locked>>	60%	9993	51%	**9	86%
[Lovex S020]*	<<locked>>	60%	9834	50%	**2	81%
[Maxam CSB 1]*	<<locked>>	61%	8789	45%	**7	84%
[Maxam CSB 2]*	<<locked>>	62%	7934	40%	**6	89%
Maxam CSB 3	<<locked>>	62%	10950	56%	**9	93%
Maxam CSB 4	<<locked>>	60%	11516	59%	**2	97%
Maxam CSB 5	<<locked>>	62%	14069	72%	**8	100%
[Ramshot Silhouette]*	<<locked>>	62%	13503	69%	**17	81%
ReloadSwiss RS 12	<<locked>>	60%	9776	50%	**5	96%
[ReloadSwiss RS 20]*	<<locked>>	71%	11066	57%	**1	81%
Rottweil P 801	<<locked>>	60%	12691	65%	**17	100%
[SNPE Vectan A0]*	<<locked>>	68%	11763	60%	**9	80%
[SNPE Vectan BA 9]*	<<locked>>	60%	11589	59%	**5	86%
[SNPE Vectan BA9 1/2]*	<<locked>>	62%	11037	56%	**5	88%
[Somchem MP200]*	<<locked>>	65%	12343	63%	**4	80%
[Somchem MS200]*	<<locked>>	63%	10849	55%	**9	81%
Vihtavuori N320	<<locked>>	61%	10762	55%	**8	96%
Vihtavuori N32C Tin Star	<<locked>>	72%	7803	40%	**3	99%
[Vihtavuori N330]*	<<locked>>	61%	9340	48%	**2	87%
[Vihtavuori N340]*	<<locked>>	68%	11182	57%	**5	80%
Winchester 231	<<locked>>	61%	15461	79%	**50	95%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data